Gator Rubber, Paint and Tar Remover +

Gator Rubber, Paint and Tar Remover +

For Concrete Pavers, Wetcast and Natural Stone


Gator Rubber, Paint & Tar Remover + is effective in removing rubber, oil-based paint and tar from the surface of concrete pavers, wet cast & natural stones. Can be use as a cleaning agent for tools when working with Gator Rock Bond or to re-emulsify any sealer type.

Features and Usage


  • Washes off with water
  • Easy to use
  • Emulsify some sealers
  • Remover & cleaner for bonding agent
  • Cleaning sealing tools such as sprayer

Used On

  • For concrete pavers, wetcasts and natural stones that are warm to the touch.

Application & Instructions


  1. Apply product to stain.
  2. Let it soak for 5 minutes.
  3. Apply product again.
  4. Immediately scrub with hard bristle brush.
  5. Repeat steps 3 & 4 until stain dissolves.
  6. Rinse thoroughly with water.

  1. This product dissolves sealants.
  2. Do not let product dry up on paver surface.
  3. Wear goggles and rubber gloves.
  4. Use at above 60°F (16°C) in dry conditions


Products Retail Size Per Box Per Pallet
Gator Rubber, Paint & Tar Remover 946ml 6 units 24 boxes

Limited warranty

Alliance Designer Products inc. cannot guarantee results as it has no control over surface preparation and product application. If this product is proven to be defective, on the condition that it was applied pursuant to the required method of application and surface preparation, the sole obligation of Alliance Designer Products inc. is to refund the purchase price. Proof of purchase is required for any claim. Alliance Designer Products inc. shall not be liable for any other damages whatsoever, direct or consequential. To the extent permitted by law, Alliance Designer Products inc. excludes any implied warranty of quality, merchantability or fitness for purpose.