Gator Rock Bond:
Liquid Binding Agent

Keeps stones in place

Create a durable, permeable and decorative surface
with your local washed and dried riverstone or try the ready to use Gator Rock Bond Binder Kit.

APPLICATION INSTRUCTIONS

PLEASE NOTE
  • Rocks have to be clean, free of dust & 100% dry.
  • For pedestrian use only.
  • Works above 60°F (16°C).
  • Allow 24 hours to dry without rain.
  • Wear gloves to avoid having binder sticking on your hands. Products should be mixed in a masonry mixer or in a wheelbarrow or on a plywood board.
  • All tools used could be cleaned using Gatorene.
  • GATOR ROCK BOND has a high gloss appearance when first applied, the shine will gradually diminish within 3 months. This will not affect the bonding of the stones.
STEP 1
  1. Always refer to the latest GATOR ROCK BOND LIQUID BINDING AGENT Technical Data Sheet (TDS) at AllianceGator.com before installing GATOR ROCK BOND LIQUID BINDING AGENT.
  2. Prepare a solid base by densely compacting 4″ (10 cm) of crushed stones.
STEP 2

Mix in a ratio of one container (1 U.S. gal. / 3.78 L) of GATOR ROCK BOND LIQUID BINDING AGENT with (320 lb) of the below mentioned stones for 4 minutes. Mix products automatically with a masonry mixer or you can manually mix on a sheet of plywood or in a wheelbarrow.

STEP 3
Trowel the mixed riverstone on the surface desired, within 20 minutes after mixing.
Suitable Rock Types

Riverstone • Granite • Limestone • Marble

  • 1/8″ to 3/8″ (3 to 10 mm)
  • Dry and Free of dust
ALLIANCE DESIGNER PRODUCTS INC. cannot guarantee results as it has no control over surface and sub-surface preparation and product application. ALLIANCE DESIGNER PRODUCTS INC. agrees that, if the product is proven to be defective, and on the condition that it was installed pursuant to the method of application of surface and sub-surface preparation described above, then ALLIANCE DESIGNER PRODUCTS INC. agrees to refund the purchase price. Proof of purchase is required for any claim. EXCLUSION OF RESPONSIBILITY THE PARTIES AGREE THAT REFUND OF THE PURCHASE PRICE AS STATED IS THE ONLY OBLIGATION OF ALLIANCE DESIGNER PRODUCTS INC. IN ALL EVENTS, ALLIANCE DESIGNER PRODUCTS INC., SHALL NOT BE LIABLE FOR ANY OTHER DAMAGES OR COSTS, DIRECT OR CONSEQUENTIAL. TO THE EXTENT PERMITTED BY LAW, ALLIANCE DESIGNER PRODUCTS INC., EXCLUDES ANY IMPLIED WARRANTY OF QUALITY, MERCHANTABILITY OR FITNESS FOR PURPOSE.