Menu
Gator Fabric GF3

Gator Fabric GF3

Fabriqué de polyester agencé par liaison thermique
pour recouvrement de plates-bandes et aménagement paysagers

Description

Gator Fabric GF3 is a Spunbond fabric (Thermal, at-bonded) made of polyester that allows air and water to pass through and reach the plant. It’s formulated to resist deterioration due to exposure to ultraviolet light, mildew, non-biodegradable and is inert to commonly encountered soil chemicals. Gator Fabric GF3 is commonly used as weed barriers in landscape, planting bed, under mulch, decorative rock and has an expected lifespan 20 year.

Applications & Benefits

Applications

  • Weed control & soil separation
  • Flower bed & mulched area
  • Garden landscape covering

Features

  • UV-Resistance
  • Inert to soil chemicals (Alkalis, Acids)
  • Inert to biological degradation
  • Easy to cut

Benefits

  • Creates a barrier that reduces weed growth
  • Allow water, fertilizer and air pass through

Uses

  • Weed control & soil separation
  • Flower bed & mulched area
  • Garden landscape covering
  • Mulch or decorative rock garden
  • Separation barrier for plantation

Available in the Following Rolls

NGF3-0305000 Spunbond 3´ x 50´
NGF3-0310000 Spunbond 3′ x 100′
NGF3-0405000 Spunbond 4′ x 50′
NGF3-0410000 Spunbond 4′ x 100′
NGF3-0610000 Spunbond 6′ x 100′
NGF3-063000 Spunbond 6′ x 300′

Installation

Method of application of GATOR FABRIC GF 3 SPUNBOND for drainage and soil separation:

1. Excavate the soil in the location of the project according to best practices.
2. With a rake, even out and level the soil as the under bed of your landscape installation.
3. Apply GATOR FABRIC GF 3 to the entire base of the hardscape installation and trim to size.
4. Spread mulch or selected ground cover on top of installed geotextile, then plant flowers and bushes according to desired landscape.

Installation

* Disclaimer for GF 3

Information regarding the physical properties, performance and permitted use of Alliance Designer Products Inc.’s Gator Fabric products is, to the best of our knowledge, reliable. However, Alliance Designer Products Inc. assumes no liability for the accuracy or completeness of this information or for its ultimate use. As Alliance Designer Products Inc. has no control over methods of use and field conditions, Alliance Designer Products Inc. disclaims all warranties, expressed or implied, including, without limitation, the warranties of merchantability and/or fitness for a particular purpose and as to quality. The final determination as to the appropriateness or suitability of any Gator Fabric product in any particular application rests with the end user and is the end user’s sole responsibility. This document should not be construed as engineering advice.

Canada