Menu
Menu
Gator Block Bond<br>High Performance, Low VOC

Gator Block Bond
High Performance, Low VOC

High Performance Adhesive

Description

GATOR BLOCK BOND HIGH PERFORMANCE, LOW VOC is one of the best adhesives on the market. It is especially formulated for bonding concrete pavers, wet cast, natural stones, retaining walls, masonry units and bricks.
GATOR BLOCK BOND HIGH PERFORMANCE, LOW VOC is formulated to provide s strong bond to the above materials if properly installed.

Features and Benefits

  • Low VOC.
  • Works at above freezing temperature (32°F / 0°C).
  • Works on dry and damp surfaces.
  • Waterproof.
  • High strength and durability.

Application & Instructions

Method of application of Gator Block Bond High Performance Low VOC Adhesive

Surfaces must be structurally sound, dry, clean, and free of dirt, moisture, loose particles, oil, grease, asphalt, tar, paint, wax, rust, waterproofing or curing and parting compounds, and membrane materials.

INSTRUCTIONS

  1. Surfaces must be clean and free of any material that may prevent adequate adhesion.
  2. Cut tip on slant for 1/4˝ to 3/8˝ bead. Puncture inner seal and place in cartridge gun.
  3. Apply adhesive to one of the surfaces in either a continuous or spot bead. Surfaces below freezing should be free of frost.
  4. Press surfaces firmly together with a slight twisting motion. Certain large applications may require additional bracing until adhesive has dried.
  5. The product cures in 48 hours but allow 4 or 5 days to be able to walk on caps, steps, copings, overlays and heavy traffic areas.

PLEASE NOTE

    Material may be repositioned for up to 30 minutes without losing bond strength. Moisture will shorten the open time of polyurethane adhesives. Avoid use when raining or onto standing water.

    GATOR BLOCK BOND ADHESIVE is not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams.

CLEAN UP

    Tools and adhesive may be cleaned with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions.

COMPOSITION

    Gator Block Bond High Performance Low VOC Adhesive is a high-solids polyurethane elastomer that cures by reaction with atmospheric moisture.

ADHESIVE STRENGTH

    Concrete to concrete
    850 psi in 24 hours
    1000 psi in 7 days

Coverage

FOR 1/4″ BEAD (APPROX.)

10 oz / 296 ml 28 oz / 828 ml
m ft m ft
~9 ~31 ~26 ~86

Packaging

Products Retail Size Cartridges/Box Boxes/Pallet Units
Gator Block Bond 10 oz / 296 ml 12 90 1080
Gator Block Bond 28 oz / 828 ml 12 60 720

Boxes / Pallets have to be stored indoors. The indoor storage unit does not have to be heated during the winter.

Limited warranty

Alliance Designer Products inc. cannot guarantee results as it has no control over surface and sub-surface preparation and product application. Alliance Designer Products inc. agrees that, if the product is proven to be defective, and on the condition that it was installed pursuant to the method of application of surface and sub-surface preparation described above, then Alliance Designer Products inc. agrees to refund the purchase price. Proof of purchase is required for any claim. EXCLUSION OF RESPONSIBILITY THE PARTIES AGREE THAT REFUND OF THE PURCHASE PRICE AS STATED IS THE ONLY OBLIGATION OF ALLIANCE DESIGNER PRODUCTS INC. IN ALL EVENTS, ALLIANCE DESIGNER PRODUCTS INC., SHALL NOT BE LIABLE FOR ANY OTHER DAMAGES OR COSTS, DIRECT OR CONSEQUENTIAL. TO THE EXTENT PERMITTED BY LAW, ALLIANCE DESIGNER PRODUCTS INC., EXCLUDES ANY IMPLIED WARRANTY OF QUALITY, MERCHANTABILITY OR FITNESS FOR PURPOSE.

USA